The company Kalo Būve, according to individual orders, manufactures lifting garage doors for both private houses and industrial needs. The gate is assembled from panels produced in Italy by Italpannelli and components from the Dutch company FlexiForce. The gate can be adjusted to different room configurations and sizes.

The standard set of gates includes:
• door panels with standard color (white; brown; silver gray)
• panels with finger protection between sections
• convenient handle for closing and opening the gate
• latch for closing the gate from the inside
• 2-year warranty

• The panels are made to protect against the possibility of squeezing fingers between the panels - finger safe
• Good thermal insulation provided by 40 mm thick panel filling with polyurethane and sealing rubbers between panel joints. U (W/m2K)=0.535; λ=0.023 W/mK (according to EN 13165:2001 C5)
• The gate is equipped with fall protection in case of cable or spring breakage.

In the sectional door panels, it is possible to incorporate an organic glass package window 680×370 mm. Such windows are usually built in if there is no other source of natural light in the garage.
• Windows can be embedded in each panel, as well as several in one panel
• Windows increase comfort by eliminating the need to turn on the light every time you enter the garage
• Windows do not reduce the heat resistance of the gate

Staff doors are more often found in garages, but they can be incorporated into any gate.
• Utility door allows you to save heat in the room
• Staff door saves time
• Staff doors can also be installed in already installed garage doors

If the humidity in the room is high, it is possible to incorporate ventilation hatches with adjustable air flow into the door panels.

It is possible to install a gate lock in the sectional gate.
• With the gate key, it is possible to close the gate both from the inside and outside
• The gate key is installed if there is no gate automation
• The gate key is installed if the only exit is through the garage

• equipment against closing of the gate in case of cable breakage
• equipment to prevent the gate from closing in the event of a spring break

The lifting gate of the industrial sectional type is initially considered as a mechanism operated manually or with the help of a chain winch. The gate can be equipped with electric drives of different power and intensity.

Industrial lifting gates differ from private sector garage gates by:
• With dimensions of the gate plane, width up to 9m, height up to 10m.
• With more diverse types of gate lifts, which allows them to be installed in almost any configuration in the room.
• With higher permissible work intensity due to components of increased strength, and increased operating cycles of the torsion spring. The number of cycles starts from 25,000.
• In coordination with the manufacturer, torsion springs of increased strength are available with a large number of possible operating cycles.

The standard set of gates includes:
• Door panels with standard color (white; brown; silver gray)
• Panels with finger protection between sections
• Convenient handle for closing and opening the gate
• Latch for closing the gate from the inside
• 2-year warranty

• Gate opening mechanism with a chain
• Staff door
• Organic glass package (680×370) built-in in the gate section
• Equipment against closing of the gate in case of cable breakage
• Equipment to prevent the gate from closing in the event of a spring break
• Photocell – identifies an obstacle and prevents the gate from closing. This equipment allows you to install the automatic gate closing function.
• Remote control system – , complete with an optical sensor in the bottom rubber, for using the gate with a remote control.
• Traffic lights – for traffic management.
• Code Lock – Allows access to the gate by individuals with an access code.
• Wall button with security key - Allows the gate to be closed against unauthorized use.
• Service door closing sensor – will not allow the door to start lifting if the service door installed in it is not closed.
• Torsion spring break detector – stops the automation in case the torsion spring breaks.
• Cable break sensor – automatically stops the operation of the electric motor if the gate cable is broken.